Insulating your attic is one of the best things you can do to increase your energy efficiency and comfort. It prevents warm air from escaping during winter and keeps cool air inside during summer, helping to reduce your HVAC workload. In addition, it provides protection from the elements and a barrier against condensation, pests, and rodents.

There are several types of attic insulation, including fiberglass batts, blown-in cellulose, and spray foam. Each type of insulation has different advantages and disadvantages. Your professional should be able to recommend the type that best meets your needs.

Cut Utility Costs with Attic Insulation | Efficient Foam Insulation Inc. Tips

Fiberglass batts are long strips of fiberglass or other materials that fit in between attic joists. They are lightweight and easy to install and offer good thermal protection. Blown-in cellulose is made from recycled newspaper and comes in loose-fill and dense-pack varieties. It can be a bit more expensive than fiberglass batts, but it’s eco-friendly and works well to seal air leaks.

Spray foam insulation is made from polystyrene or polyisocyanurate and comes in panels. They are more durable than other forms of insulation and provide a high R-value per inch, while being moisture-resistant. They are typically more expensive than other insulation options and should be installed by a professional.

Before a professional insulation installer can start installing attic insulation, you need to clear out any boxes or other clutter from the attic space. This is important because it will allow the professionals to properly install the insulation and avoid compromising your home’s ventilation system or blocking any existing ductwork or vents.

Efficient Foam Insulation Inc.
281 Larson Rd, Attica, MI 48412, United States
810-656-0519

Hood cleaning is a vital procedure that contributes to the safety and efficiency of any culinary establishment. Over time, a restaurant’s exhaust system accumulates grease, smoke and other residues that, if not properly cleaned and maintained, pose fire hazards, reduce equipment performance, and compromise air quality. Regularly performing this critical process ensures compliance with local regulations and minimizes the risk of costly fines or closure.

A typical kitchen exhaust system consists of a hood, filters, and ductwork that capture and contain smoke, heat and grease vapors produced during cooking operations. According to National Fire Protection Association Standard 96 (NFPA 96), these systems must be cleaned monthly to prevent fires and maintain proper function. The cleaning process usually involves the following steps:

Prepping for Cleaning

Before starting to clean, it is important to shut off all pilot lights and gas valves and cover all appliances with tarps. This will protect kitchen equipment from chemical cleaners, grease and debris. Next, a service technician will apply a degreasing solution to the walls and ceiling of the hood and allow it to soak for a few minutes. Once soaked, a high pressure power washer is used to remove the solution and remaining grease.

The hood, filters and ductwork are then rinsed with hot water to remove any leftover chemicals or grease. A professional can typically complete this process in as little as three hours, depending on the size of the kitchen and the condition of the exhaust system.

Legend Hood & Powerwashing Services
Suisun Valley Rd E2060 Fairfield, CA 94534
408-650-4753

Spray Foam Genie Detroit often focuses on insulating homes but neglects air sealing, which is just as important for maintaining comfortable indoor temperatures year-round. In fact, many states offer financial assistance to help homeowners pay for improvements like insulation and air sealing.

The benefits of attic air sealing are numerous and varied. It keeps warm outside air from coming in during the winter, limits the amount of hot attic air that enters conditioned spaces during the summer, and helps to minimize noise pollution. Air sealing also reduces energy costs and prevents the formation of ice dams on the roof, which can damage the structure.

Practical Attic Air Sealing Tips

Typically, the biggest air leaks in homes are around doors and windows but other areas need attention too. Caulk and weather stripping should be used to seal these areas along with any places where plumbing, ducting or electrical wiring come through walls, floors and ceilings. Foam gaskets should be installed behind outlet and switch plates on wall surfaces. It is a good idea to map out your home and highlight areas where air leakage is prevalent. Using a red pen to trace around any area where the map meets your home will show you the areas that need major attention.

One of the most overlooked spots for air leaks is in the attic access hatch. It should be sealed with a high-quality foam, such as Loctite Foam Gaps and Cracks, which is especially formulated to fill thicker gaps and is resistant to harsh elements.

Spray Foam Genie Detroit
2241 Star Ct, Rochester Hills, MI 48309,
(313) 217-5028